background image

Labkotec Oy 
Myllyhaantie 6 
FI-33960 PIRKKALA 
Tel. +358 029 006 260 
Fax +358 029 006 1260 
Internet: 

www.labkotec.fi

  

18.5.2010 

D27093_e 

 

We reserve the right to any changes. 

 

Copyright © 2010, Labkotec Oy

 

 

1(4) 

 

SET/V 

High level sensor 

OPERATION AND INSTALLATION MANUAL 

 

 

 

Summary of Contents for SET/V

Page 1: ... FI 33960 PIRKKALA Tel 358 029 006 260 Fax 358 029 006 1260 Internet www labkotec fi 18 5 2010 D27093_e We reserve the right to any changes Copyright 2010 Labkotec Oy 1 4 SET V High level sensor OPERATION AND INSTALLATION MANUAL ...

Page 2: ...g voltage Digital and analogical 7mA 13mA 8V 16V DC Cable Shielded oil proof cable 2 x 0 75 mm 2 Standard length 5 m Other lengths optional The max length of the fixed cable is 15 m Can be extended with a shielded cable The recommended maximum cable loop resistance is 75 Ω Materials PA PVC aluminum NBR Temperature range Operation 0 60 C Safety 30 60 C EMC Emissions EN 61000 6 3 Immunity EN 61000 6...

Page 3: ...are not exposed to strong stream flows mechanical abrasions or impacts The cable may be shortened or extended with a junction box if necessary The sensor is installed by hanging it from its cable at a suitable height so that the switch data is received as the surface level reaches the sensing element The example in figure 5 shows an oil separator application 4 OPERATION This chapter provides a gen...

Page 4: ... contact the representative of the manufacturer 6 SERVICE AND REPAIR The sensor must be cleaned and tested when emptying the storage chamber and in connection with the annual maintenance A mild detergent e g washing up liquid and a scrubbing brush can be used for cleaning the sensor if necessary During maintenance procedures such as servicing the oil fuel separator systems the sensor should not be...

Reviews: