SandSET-1000 12 VDC Sludge Alarm Device
D15649_E-2
Installation and Operating Instructions
Copyright © 2019 Labkotec Oy
4/13
We reserve the right for changes without notice
2
INSTALLATION
2.1
SandSET-1000 12 VDC control unit
SandSET-1000 12 VDC control unit can be wall-mounted. The
mounting holes are located in the base plate of the enclosure, beneath
the mounting holes of the front cover.
The connectors of the external conductors are isolated by separating
plates. The plates must not be removed. The plate covering the
connectors must be installed back after executing cable connections.
The cover of the enclosure must be tightened so, that the edges touch
the base frame. Only then do the push buttons function properly and
the enclosure is tight.
Before installation, please read the safety instructions in chapter 6 !
Kuva 3. SandSET-1000 12 VDC alarm device installation.
Summary of Contents for SandSET-1000 12 VDC
Page 11: ...8 DECLARATION OF COMFORMITY...
Page 12: ...9 DECLARATION OF COMFORMITY...
Page 13: ...10 DECLARATION OF CONFORMITY...
