Specifications
All
Splitter/Transmitter
Receivers
Max.Pixel Clock:
165 MHz
Max. Video Resolution:
up to 1080p@60Hz
Power Consumption
8W max
Power Supply
DC 12V
𝌂
2.5A
ESD Protection
± 8kV (air-gap discharge)
Human Body Model
± 4kV (contact discharge)
Operating Temperature
0°C ~ 40°C
Storage Temperature
20°C ~ 60°C
Relative Humidity
20~90% RH
Input Ports
1x HDMI, 1 x Mini USB
1x RJ45/1x IR IN
Output Ports
1x HDMI/4x RJ45/1x IR OUT
1x HDMI
Dimensions (mm):
210 (W) x 83 (D) x 17 (H)
79 (W) x 68 (D) x 17 (H)
Weight:
415g
4 x 131g
Splitter/Transmitter
TX 1.
POWER LED:
The red LED illuminates when the device is connected to a power supply.
TX 2.
CAT OUT1- OUT4:
Four RJ45 output ports to provide signal output to the IR receivers via CAT5E/6 cables.
TX 3.
HDMI OUT:
Local HDMI loop output port.
TX 4.
HDMI IN:
HDMI Input port. Connects to the AV source via an HDMI cable (not supplied).
TX 5.
IR OUT:
Connects the IR Blaster cable (supplied) allowing the blaster to be positioned in direct
line-of-sight of the source device sensor for IR signal transmission.
TX 6.
EDID Selector:
Selecting output signal format via EDID Selector. See the “EDID Switching”
TX 7.
UPDATE:
System software to update.
TX 8.
DC IN:
Pluging the 12V
𝌂
2.5A power supply into the unit.
TX 9.
POWER SWITCH
: Power ON\OFF Switch.
3
RX 1.
EQ switch:
HDMI Receiver equalizer switcher. See “Equaliser Switch”
RX 2.
HDMI out:
Connects an HDMI cable to the input port of your display such as an HDTV.
RX 3. I
R in:
Connects the IR Receiver to the IR sensor for IR signal reception from a remote control.
RX 4.
Power LED:
The LED will illuminate when the device is connected with power supply.
RX 5.
CAT input:
Connects a CAT5E/6 cable to one of the CAT output ports on the transmitter.
RX 6.
Lock LED:
The LED will illuminate when the HDMI signal from the transmitter is stable.
Receiver