Labex Inspiration User Manual, Date: 20 April 2020, # 9
battery charge level. Just like on your mobile phone. If all or nearly all LEDs
light up, that means the battery is close to full. If there are only one or two
LEDs light up, then your battery should be charged soon.
Note: When the battery capacity is lower than the first LED, the device will
stop emitting sound, and a red LED will light up every time you touch the
touch slider or the top cap. At that point you have to charge the device.
15.
Charging the battery
To charge the device plug the provided USB cable in the USB port at the
bottom of the device. Plug the other end of the provided USB cable into the
provided USB charger and plug the charger in a wall socket. The Green and
Red LEDs at the bottom of the device should light up. When your device
become fully charged the Red LED turns off.
Note: The device will not work while charging. This is a safety requirement
regarding the EMC standards requirements.
Note: If you find that the battery in your device can not hold a charge for
more than one hour of use, there is a possibility that the integrated battery is
near the end of its life cycle. If this happens during or outside the included
warranty period, please contact your local distributor or Labex Trade Ltd. at
https://labextrade.com/contacts
or at
C
ARING FOR YOUR DEVICE
16.
Cleaning and maintenance:
Since the device is in constant contact with skin and other surfaces, it should
be cleaned at least once every 24 hours. For the best hygiene practices, the
following procedure should be followed:
Clean the outside surfaces of the device with a slightly wet soft
microfiber cloth.
After cleaning all the surfaces, you can disinfect the device by applying a
small amount of disinfectant gel or alcohol. Alternatively, alcohol wipes
can be used.
Wipe the device with a soft microfiber cloth again.
