Labex Inspiration UM, 15 February 2021, # 7
If you turn the device on from the bottom switch
while charging and try to use it, the device will not
emit sound and the LED Bar will blink in Red to
warn you. To use the device, simply disconnect the
charger.
After charging the device, it must
be turned on.
To do this, use the ON/OFF Switch located on the
bottom of the device.
A short and quiet sound will be emitted which
indicates that the internal mechanical system of
the device is working properly. The active LED strip
illuminates briefly and indicates the battery level.
Normal operation of the device is done when the
Top Cap of the device is pressed firmly against the
neck, then activate the sound by placing your
finger on the touch panel to speak. Moving your
finger up and down will increase and decrease the
pitch of the sound, respectively.
Т
his allows the
expression of intonation
