Labex Comfort User Manual, Date: 20 April 2020, # 7
Battery Indicator LED will start blinking after every release of a speech
button. When the battery drains down to 10%, the Battery Indicator LED
will light up in solid red. At this point, you should replace your battery with
a fully charged one.
12.
Different batteries
There are two high capacity Li-Io batteries included with your Labex Digital.
This will allow you to have always a fully charged battery on hand.
However, Labex digital is compatible with all 9V batteries on the market –
rechargeable or non-rechargeable.
13.
Charging the battery
After you pull out your drained battery, you should charge it with the
included intelligent charger:
1)
Put the battery inside the charger while minding the “+” and the “–“.
2)
Put the charger into an electrical socket.
3)
The corresponding red LED will light up, meaning the battery is
currently charging.
4)
The red LED will turn off when the battery is fully charged.
Note: The included intelligent charger will NEVER overcharge your
batteries. Each battery life is more than 500 recharge cycles.
WARNING: Do not try to charge ANY other kind of battery with the
charger! The charger is designed ONLY for Li-Io (Lithium-Ion) batteries!
Trying to charge any other kind of battery will result in permanent damage
to the battery and the charger!
Note: If you find that the battery in your device can not hold a charge for more
than one hour of use, there is a possibility that the battery you are using is near
the end of its life cycle. If this happens we advise you to recycle this battery and
get a new one.
