Labesto LRW4006, Instruction Manual, Page: 6 / 13

any way, it must be replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid an electrical hazard.
16. Do not allow the power cord to hang over sharp table edges or come into contact with hot
surfaces.
17. Make sure that the machine is switched off and remove the plug from the mains electrical
supply when it is not in use, before it is cleaned, before changing accessories or moving parts and
while it is being repaired.
-7-
18. To prevent the risk of electrical shock, do not immerse the power cord, plug, or any non
removable parts of this machine in water or any other liquid.
19. The machine base must not be submerged in water, as any contact with the electrical parts
would create the risk of malfunction and electric shock. Do not use the appliance with wet hands.
20. Do not use the machine outdoors.
21. Always switch the power OFF before removing the plug from the wall socket.
22. To unplug the appliance, grasp the plug firmly and remove it from the mains electrical supply.
DO NOT PULL ON THE CORD.
23. Never use the machine or accessories if it is damaged in any way.
24. All repairs should be done by a qualified electrician. Improper repairs may place the user at
risk.
25. When handing this product over to a third party, ensure that this instruction manual
accompanies the appliance.
26. This appliance shall not be used by children. Keep the appliance and its cord out of reach of
children.
27. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards involved. Children shall not play
with the appliance.
28. Be careful if hot liquid is poured into the appliance as it can be ejected out of the appliance due
to a sudden steaming.
29. The appliance is only to be used with the stand provided.
30. Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
31. The heating element surface is subject to residual heat after use.
32. When using the appliance, avoid spillage of water on the connector as this may cause damage
to the appliance.