13
The customisable parameter sequence is the following:
•
AUTO operating program
•
EXIT operating program
•
ENTER operating program
•
OPEN operating program
•
LOCK operating program
•
OFF operating program
•
A function button (winter reduced opening)
•
C function button (F2 special functions)
The last customisable parameter, finally, is:
•
Selector activation with “
SLIDE
” (>>>)
This function allows to activate the selector, when it is in screen saver mode, by just swiping with a
finger from left to right in the bottom section of the digital selector, near the A-SET-B buttons. Although
not an actual password (which anyway can be set as described in the paragraph “USER PASSWORD
MANAGEMENT”), it still allows to ensure that the operating program adjustment menu can only be
accessed if one is aware of this option.
Warning!
The operating programs whose state is OFF shall no longer be displayed, but the selection
will switch to the first available program whose state is ON; accordingly, the A( ) and C(F2)
buttons shall have no effect if their state is set to OFF.
After setting the customisation options, press the SET button to return to the main page of the technical
area.
To exit the technical area and return to the main screen, press SET again.
4-LANGUAGE
This menu allows to select the language for the operating program
description.
Scroll the available languages using the A (down) or C (up) buttons until
you find the desired one. Then press the SET button to confirm and exit
this menu.
5-CONNECTION
This menu allows to repeat the automatic detection of the doors existing on the serial communication
line (up to 2), whose data shall be stored in the processor. During this step the “WAIT” message will be
displayed on the alphanumeric character line. Wait for this step to be completed before you touch any
button.
If the operation has been successfully completed the selector will display on the alphanumeric character
line the saved operating program for the door, along with its text, in the desired language.
