ENABLING USER (primary and service) PASSWORD USAGE
?
Select “PASSWORD ON / OFF”
?
Press OK (F1) button.
?
Press ON button to enable the user password usage and return to PASSWORD MANAGEMENT menu.
To return to work program view, press EXIT button twice.
?
From this moment on, whenever the user wants to access to N-DSEL digital programmer to change the automatic door work program,
the primary or service password must be typed.
When the user decides to enable the password usage, it is recommended to change the combination of both primary and
service password.
DEACTIVATING THE USER PASSWORD USAGE
?
From PASSWORD MANAGEMENT section, type “PASSWORD ON / OFF”
?
Press OK (F1) button
?
Press OFF (F1) button to disable user password usage.
?
To return to general programming menu press the EXIT button twice.
?
From this moment on, the access to N-DSEL digital programmer as program selector is free.
?
Type the primary password
?
Type the primary password
12
4.3.3)
LANGUAGE
To select the language, do the following:
1.
Press the SET button for 5 second to enter the programming menù general
(see Diagram 1 in par. 4.3.1)
2.
Press the
F1
button three time to move to the submenu Language.
3.
Press the Enter button to enter the “Language section”.
?
Use
F2
and buttons to move arrow to the language desired.
?
Press EXIT button to return to general programming menu.
Press the EXIT button to return to work program view of the automatic door
