15
1
2
3
4
5
6
4
6.3) SHORT SLIDE PULL ARM BDT2R55
a) Insert the M8 x 60 screw (2) in the tapered pin (1);
b) Insert the sliding arm (3) into the tapered pin (1) and fasten it
with the M6 x 12 screws (4)
c) For the assembly of the sliding guide (5), refer to paragraph
6.4
d) The pin (6) shall be inserted into the sliding guide shoe
6.4) SLIDING GUIDE FOR PULL ARM
a) Fasten the sliding guide (1) on the leaf through the hole
(6-7), following the dimensions specified in the technical
drawings in paragraphs 5.1, 5.2, 5.3.
b) Insert into the sliding guide the shoe (3) on which the pull
arm pin shall operate.
c) Insert the striker (5) into the sliding guide and fasten it at the
opening limit position with the dowel.
d) Place the cover casing (2) on the sliding guide (1).
e) Insert the two side caps (4) at the ends of the sliding guide.
6.5) BSS2 ARTICULATED PUSH ARM
a) Insert the M8 x 70 screw (2) in the tapered pin (1);
b) Insert the lever arm (3) into the closed shell (4)
c) Insert the tapered pin (1) above the lever arm (3), through
the closed shell (4)
d) Tighten the M6 x 30 screws (5) to lock the lever arm (3) on
the tapered pin (1)
e) Fasten the arm plate (9) on the leaf or on the transom with
two screws, at the points specified in the technical drawings
in paragraphs 5.4 or 5.5
f) Adjust the length of the telescopic arm (7-8) and tighten the
screws (6)
