Labconco Protector Echo, User Manual

Page: 75 / 112

75
Note:
If needed, the individual duplexes can be converted for instant attachment to a
wall outlet by a qualified electrician by ordering an electrical outlet as harness listed
below:
Catalog # Description
9582710 Electrical Outlet Harness, 115V
– 15A US Plug 5-15P
9582712 Electrical Outlet Harness, 115V
– 20A US Plug 5-20P
9582720 Electrical Outlet Harness, 230V
– 15A US Plug 6-15P
Sash Stop Kit
The sash stop kit restricts how far a vertical-rising sash may be opened. This small
plastic device may be easily field installed on the fixture corner post of any filtered hood.
Catalog # Description
9410300 Sash Stop Kit Left Side (included)
9410303 Sash Stop Kit Right Side
Distillation Grid Kits
The distillation grids allow the hood user to mount glassware,
motors, stirrers and other apparatus. They are for Benchtop
Echos only. For orderable Floor-Mounted Distillation Grids
contact Labconco.
Kits include stainless steel rods, connectors, instruction sheet
and drill template.
Requires installation including drill holes.
Catalog # Description
9725204 4 FT
9725205 5 FT
9725206 6 FT
9725200 8 FT
Sash Reduction Wing Kits
The Sash Reduction Wing Kits are hinged with detents to maintain open and closed
positions. Open position is used for loading equipment and closed position is used for
normal operation. An optional accessory airflow monitor is available for sash position
alarms. Alternatively, to ordering the Sash Reduction Wing Kits, the end user can simply
lower the 16-inch sash stop to the 10-inch sash stop position. Sash Reduction Wing Kits
promote comfort for some users that prefer a 16-inch sash opening rather than a 10-
inch sash opening. To increase the sash stop height for a 6 FT Floor-mounted Echo, the
wing kits can be added.
Table 9-13
Table 9-11
Figure 9-7
Table 9-14