Chapter 7: Modifying Your Protector Pass-Through
Product Service 1-800-522-7658
32
Original instructions
Installing Ceiling Enclosures Above the
Fume Hood
Your Protector Fume Hood has mounting holes to accept a ceiling enclosure to
close off the area between the top of the hood and the ceiling. Contact Labconco
Customer Service for ordering information. Ceiling Enclosures for Pass-Through
Hoods are handled as a specials request.
Figure 7-2
Installing Additional Service Fixtures
Additional service fixtures can be installed in the available service fixture holes in
both sidewalls and corner posts. The fume hood is factory set to accept up to four
valves per side. Contact Labconco Customer Service for information.
9827900
Cold Water Gooseneck, any position
9571000
Service Fixture CW, lower right, Pos. 1
9571001
Service Fixture CW, mid-lower right, Pos. 2
9571002
Service Fixture CW, mid-upper right, Pos. 3
9571003
Service Fixture CW, upper right, Pos. 4
9571004
Service Fixture CW, lower left, Pos. 1
9571005
Service Fixture CW, mid-lower left, Pos. 2
9571006
Service Fixture CW, mid-upper left, Pos. 3
9571007
Service Fixture CW, upper left, Pos. 4
9571100
Service Fixture GAS, lower right, Pos. 1
Figure 7-5 – Hose Connector
Figure 7-3 - Knob
Figure 7-4 - Valve
