06 AGC
Defines the AGC Time Constant (slow-fast)
CW / SSB / AM
Select
SubMenu
, adjust with
M
TUNE/MULTI
: from 1 (slow) to 10 (fast). When in RX,
the AGC Level is shown at the top line of the display.
During adjustment, it only shows changes to the AGC level in the top line of the display
when adjusting the timing of the current mode the radio is in. It does not change while
adjusting the AGC timing for other modes. For other modes, monitor change in the
bottom line of the display.
Defaults:
CW = 5; SSB = 3; AM = 3.
Adjust for personal preference, according to band conditions.
07 RF
RF GAIN
CW / SSB / DIG / AM / FM (Adjustable by
D
)
Select
SubMenu
, adjust with
M
TUNE/MULTI.
Adjust for personal preference, according to band conditions.
Default:
CW = 0; All other Modes = 0.
08 Power
TX Power Adjustment
TX Power:
Adjustable with
M
TUNE/MULTI
Adjustable in percentage (%) of maximum TX power, from 10% to 100%.
Default:
100%
09 GAIN
MIC / DIG TX Audio Gain (Level)
Adjustment for Voice and Digi Modes.
MIC:
Microphone Gain; adjustable from 1 to 100.
DIG:
TX Audio Gain; adjustable from 1 to 100.
Default: MIC =
20; DIG = 20.
10 NR Level
Noise Reduction Level.
Select
SubMenu
, adjust with
M
TUNE/MULTI.
Digital Signal Processing (DSP) feature for reducing noise on a noisy band. NR is most
effective on CW. It is also effective on SSB, but degrades the fidelity of the received
signal somewhat.
Default:
50
Adjust for most effective noise reduction.
11 NB Level
Noise Blanker
Adjustable from 40 to 100 with
M
TUNE/MULTI.
The Noise Blanker is a DSP feature used for reducing certain types of pulsed noise
(i.e., lightning or automotive ignition noise).
Default:
50
Adjust for best noise reduction.
Menu Functions
22