1. GETTING STARTED: BUILT-IN BLUETOOTH SYSTEM
1.1 Button Functions
1.2 Powering On and Off
Press and hold the
Center Button
and the
(+) Button
at the same
time for
1 second
to turn the headset on or off.
1.3 Charging
The
Bluetooth Communication Module
can be charged using many
common methods via the supplied USB power & data cable:
1. Plugged into a computer’s USB port.
2. With a USB-equipped AC adapter via a wall-outlet charger.
Note:
Please make sure to take off your helmet while charging. The
headset automatically turns off during charging.
Depending upon the charging method, the Bluetooth Module will be
fully charged in about 2.5 hours.
1.4 Checking the Bluetooth Module’s Battery Level
There are two ways to check battery level:
1. Visually, with LEDs when powering on.
Note:
Blinking LEDs alternate from blue to red when battery power is
low.
2. Audible method: Press and hold the
Center Button
and the
(+)
Button
for
3 more seconds
as the headset powers on. A prompt will
announce the remaining battery level.
Summary of Contents for R1M
Page 1: ...Copyright 2019 Lab T Inc User Manual...
Page 2: ...R1M Manual...
