Lab-T Grand i10, User Manual, Page: 33 / 45

English
Setting the System
This chapter explains how to customize the
unit settings and keep the unit up to date.
►Checking/Updating/Initializing
the unit
1
Press the SETUP button on the unit to
display the Setup menu screen.
2
Tap
System
>
Device Information
.
3
Check the unit's system software
version and other information.
To update the unit and Map to the latest
software version, tap Software Update >
Yes .
The unit will restart to update the firmware
or map. The customized settings and user
data will still be maintained after the
update.
Caution
Do not remove the USB storage device or
turn off the ignition until the update is
complete and the unit restarts.
Doing so may damage the unit.
Note
Before updating the unit, you first need to
prepare the firmware or map files. Move the
firmware or map files to a USB storage
device and insert it into the unit's iPod/USB
port.
To return the unit to the factory default
settings and delete user data, tap
Default
Settings > Yes . The unit will restart and
initialize the system.
4
Tap OK .
►Setting the power-off display
type
1
Press the SETUP button on the unit to
display the Setup menu screen.
2
Tap Display > Power Off Display .
3
Select a display type.
If you select Blank, the screen will turn off
when the unit is switched to standby
mode.
4
Tap OK .
▌ Settings 30
6