Lab.gruppen FA Series, Quick Start Manual, Page: 8 / 10

14
FA Series Quick Start Guide
15
FA602 FA1202 FA2402
Maximum Output Power
4 or 8 Ω per channel 60 W 120 W 240 W
Number of Ouput Channels
Number 2
Minimun Load Impedance
4 Ω mode 4 Ω
8 Ω mode 8 Ω
70 V output mode 82 Ω 41 Ω 20 Ω
100 V output mode 166 Ω 82 Ω 41 Ω
Controls
Front N/A
Rear Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter
Indicators
Power On (blue), standby (yellow)
Limit (red LED), per channel Input clip, output limit
Signal (green LED), per channel >1.23 mV (-56 dBu)
Fault (red LED) Overheat, DC fault, over current etc
System
Inputs 2 x 3-pin 5.08 mm Euroblock connector
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Input sensitivty Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)
Maximum input level 9.75 V (+22 dBu)
Outputs 1 x 4-pin 5.08 mm Euroblock connector
Output circuit type Class D
Remote connector 2 x RJ45 Ethernet connector
Distortion, 1/8 rated power <0.5%
Frequency response 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk >65 dB
Signal-to-noise >100 dBA
High-pass filter 80 Hz HPF
Cooling Convection-cooled, fanless
Amplifier protection Thermal protection, over current protection, DC protection, high frequency protection
Load protection Controlled start and shutdown behaviour, DC-fault protection
Main voltage 100-240 V~, 50/60 Hz with active power factor correction
Power consumption 1/8th rated power @ 4 Ω 50 W 70 W 120 W
Mains connector Standard IEC connector
Dimensions (H x W x D) 44 x 218 x 280 mm (1.7 x 8.6 x 11.0")
Weight 2.6 kg (5.7 lbs)
Finish Brushed black anodized aluminum chassis with black painted steel bottom
Approvals CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0
Performance
Specifications
Circuit Protection
Power Supply, Voltage
Dimensions / Weight