LB-762 Controller Installation Manual
LAB-EL
Rozdział 2
Elements of regulator
2.1
Connections
Warning
For the purpose of preserving user safety, all operations on connections should be conducted with regulator power supply
switched off!
To obtain access to connections it is necessary to open the regulator casing. For this purpose:
• unscrew four plastic screws on the front panel,
• open the Casing lifting up the front panel on hinges.
Connections are placed in the rear part of the casing, mostly along side edges. The exception are: Ethernet link placed on
the top and power supply and earthing link placed on the bottom.
All connections use plugs to which wires are fixed by means of screw clamps or spring clamps.
The distribution of connectors is presented on Figure
. Description of functions of different connectors is included below
in the manual.
11
