Lab12 gordian - Multifunctional Power Distributor / Conditioner
Page
8
of
10
Operation modes
On
: Gordian
’s
processor is always active and you can see the measurements, settings and automatic
adjustments on the OLED display.
Sleep
: Gordian
’s
processor and OLED display are inactive. Power output sockets are active, but no
changes are occurred on filters and other settings.
Auto
: Gordian processor goes to active state only when the standby current exceeds the set value.
You can configure the operation of gordian's processor with the rotary switch on the right side of the face
plate. If you want the processor to be always active, switch the knob to the "On" position. If you want the
processor to be in sleep mode (output sockets will stay alive), switch the knob to the "Sleep" position. If
you want the gordian processor to become active only when your audio system is active and
automatically go to sleep when you switch off your system then you have to configure the "stand by"
current of your system and switch the knob to the "Auto" position.
To configure the "stand by" current, shut down all your system's devices and navigate to the standby
current setup (menu item 11). Press and hold the navigation button and gordian will store the current
consumption of your inactive system. Rotate the operation mode switch to the "AUTO" position and the
OLED display will now become active only when your system's current consumption is great enough to
indicate that your system is active.
