Mascot FT Combination Boiler
Page 69
8.3 Draining and Cleaning
1. Place a bucket under the appliance to collect the residual water inside the combination boiler.
2. Press Power button on the front control panel to turn OFF the electrical power to the combination boiler.
3. Turn off the gas valve.
4. Close water supply valve on the inlet to the appliance. If there is no valve, turn off main water valve.
5. Open the hot water faucets completely.
6. Remove the cold water inlet filter and 'CH' return filter. And then clean it with a toothbrush and clean
running water.
7. To refill the combination boiler, follow the steps of “Draining the Combination Boiler ” in reverse.
