Page 3 of 12
Programming
High Temp DHW Set Point
1. Press DHW button.
2. Then press and Hold DHW
button until “H” appears on the
screen.
3. Turn the Scroll/Select dial to
adjust desired set point.
4. Press the Select/Scroll dial to
save your selection.
Page 4
The DHW icon will
appear on the screen.
Programming
High Temp DHW Set Point
1. Press DHW button.
2. Then press and Hold DHW
button until “H” appears on the
screen.
3. Turn the Scroll/Select dial to
adjust desired set point.
4. Press the Select/Scroll dial to
save your selection.
Page 4
The DHW icon will
appear on the screen.
Note: The DHW high set point can be
adjusted to a maximum of 140° F.
An Anti-Scald device is required for
FT Floor units and FT Wall units
when DHW is set above 120° F.
Scalding may occur within 5 seconds at a setting of
140°F (60°C). Water temperatures over 125°F can
cause severe burns, or death from scalding. Children,
disabled, and elderly are at highest risk of being
scalded. Set the domestic hot water temperature
(DHW) according to your local state code.
DANGER
FT WALL MOUNTED AND FLOORSTANDING COMBI MODELS
