USE AND MAINTENANCE
LSC 008 -UK- REV. 04
7
2
STARTING OF THE MACHINE
Follow the instructions below and refer to the components described at the end of this booklet.
2.1 TURNING ON AND HEATING UP OF THE MACHINE
1. Insert the plug into the socket of the electric system, the control light (22) starts flashing to show the
connection to the electric main source (Stand-by).
2. Press the ON / OFF (27) button and keep it pressed for about 3 seconds, the green light (22) from
flashing becomes fixed to show the actual turning on of the machine. At the same time the lights from
14 to 21 turn on fixed for about a second (checking of the electronic part).
3. The light corresponding to the set temperature starts flashing to indicate that the group is being heated
up and the automatic refill of the boiler starts until the water level foreseen by the manufacturer is
reached.
4. Once the filling process is finished, the light of the boiler (13) starts flashing to indicate that the boiler
is being heated up; after the first switching on, the boiler doesn’t work until the group has reached the
set temperature.
5. Fasten the filterholder (11) to the brewing group (10).
6. Wait until the set temperature is reached, making sure that the leds on the control panel (9) switch
on progressively as the temperature increases.
The visualization of the leds will start as soon as the temperature reaches the minimum value (85°C
for the VIVALDI or 91°C for the VIVALDI II), when the led 14 switches on and continues until the
appliance reaches operating temperature (the led goes from flashing to fixed).
7. When the group has reached the set temperature the heating of the boiler starts (light boiler 13
flashing), once it reaches the set the light becomes fixed.
8. Every time the temperature of the group or of the boiler drops under the set, the relative led, indicating
the operating temperature, starts flashing (heating phase) until the set temperature is reached.
9. The machine is now ready to be used.
N.B. The operating temperature is the temperature of the machine during standard operation.
WARNING!!!
To activate and deactivate the boiler mode press the “BOILER” (26) button.
Every time you turn on the machine the boiler is in service.
When the boiler is turned off, it is impossible to make hot water and steam deliveries.
The machine can also operate in the economy mode (see relative paragraph).
