Connections and installation
Brine line
connector
DRAIN
The installation must be carried out as required by the regulations in force in the country
where the installation is performed by qualified and authorized personnel.
Incorrect installation can cause damage to the environment , people, animals and objects
for which the manufacturer declines all responsibility.
Please note that an optimal positioning of the softener will be useful when you make the
necessary routine maintenance , repairs in the field and the loading of salt in the container
of the brine.
The drain hose should be connected permanently to the appropriate hose ( see Image
above ) , verifying that the tube is of flexible type , of appropriate section and that there are
no bends along its length .
The drain hose must not be immersed in wells with standing water because it could cause
a backflow of water into the water sostener.
The excessive environmental heat or freezing can severely damage the water softener is
recommended that you place it in places with temperatures not lower than 2 ° C and no
higher than 50 degrees Celsius.
For optimal functionality of the water softener, minimum inlet water pressure must be 1,8
bar and maximum inlet water pressure must be 5 bar.
The softener BAV has been designed for the treatment of cold water and temperature limits
are : minimum 5 ° C and maximum 45 ° C.
Summary of Contents for BAV10
Page 3: ...CONTROLLER DESCRIPTION...
