16
UK
Operation and function
fig. 8
Electronic control
The electronic control ensures that the
temperatures set at the top and at the bot-
tom of the appliance are maintained. This is
achieved by means of an advanced control
of the refrigeration system, the heating ele-
ment. The set temperature will be stored in
the event of power failure.
The electronic control has the following
functions:
●
On/off switch
●
Light switch
●
Temperature setting
●
Temperature indication
●
Alarm for too high and too low tempera-
tures
Temperature indication
The display shows the set temperatures. The
upper digits of the display indicate the set
temperature at the top of the appliance, and
the lower digits of the display indicate the set
temperature at the bottom of the appliance.
Temperature setting
The thermostat is equipped with a child lock
device. This device is activated by pushing
the “up and down” buttons simultaneously.
After approx. 3 seconds “Pof” flashes in the
display. Then the actual temperatures are
shown as usual. In addition, the set tem-
peratures can be shown by pushing SET1
and SET2, respectively.
The child lock device is cancelled by push-
ing the “up and down” buttons simultane-
ously. After approx. 3 seconds “Pon” flashes
in the display, and the temperature can be
set.
Temperature setting at the top
of the appliance
Push SET1. Then the temperature at the top
of the appliance can be adjusted up and down
by means of the “up and down” but- tons. The
temperature can be adjusted from 17 to 19°C,
