12
OPERATING YOUR WINE COOLER
The Wine cooler should be placed in where the ambient temperature is between 40-95 degrees
Fahrenheit(5-35
℃
)
. If the ambient temperature is above or below this range, the performance of the
unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause
interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit (5-18
℃
)
may not be
reached.
Recommended Temperatures for Chilling Wine
.
Red Wines:
15-18
℃
(58-64
°
F)
Dry/White Wines
9-14
℃
(
48-57
°
F)
Sparkling Wines 5- 8
℃
(
40-47
°
F)
•
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”
Button
To control this appliance turn on/off ( press and hold this buttons for approximately
2 seconds).
•
To control the inner light turn on/off.
•
“ ” Button
Used to set temperature in upper zone.
•
“ ” Button
Used to set temperature in lower zone.
Setting the Temperature Control
The Wine Cooler has two temperature zones.
•
Upper zone – temperature range 5 to 12
•
Lower zone – temperature range 12 to 18
•
You can set the required temperature either zone by pushing the Set Upper or Set Lower button.
When you push the two buttons for the first time, the LED readout will show the previously set
temperature set for that zones .
•
The temperature preset at the factory are:
Upper zone:: 6
Lower zone: 12
•
To set the temperature in the Upper zone press Set Upper button once. The present temperature
will flash. The temperature will decrease by every time the button is pressed until minimum
temperature is reached, at which point it will then revert back to its maximum setting and start
again.
•
To set the temperature in the Lower zone press the Set Lower button and follow the instructions
above.
•
To view the temperature set in either zone at any time, press the corresponding “Set Upper” or
“Set Lower” button, the “Set” temperature will temporarily flash in the LED display for 5 seconds.