![background image](http://html1.mh-extra.com/html/la-sommeliere/pro110n/pro110n_use-instruction_3252354020.webp)
19
▪
Check that the wall socket is not damaged. A wall socket in poor condition may cause the appliance
to overheat and explode.
▪
Check that the wall socket used for the appliance is properly accessible.
▪
Never pull on the main power cable.
▪
Ensure that the appliance is always electrically earthed.
▪
If the wall socket is loose, do not connect the cable, as there is a risk of electric shock or fire.
▪
Do not use the appliance if the interior lighting cover is not installed.
▪
Disconnect the appliance before replacing the lighting bulb.
▪
The appliance operates on a single phase 220~240 V / 50 Hz power supply.
▪
The appliance must be connected to an earthed wall socket, in accordance with applicable
recommendations.
▪
Do not attempt to replace a damaged power cable, contact your after-sales service.
▪
The power socket must be easily accessible but out of reach of children.
▪
In case of doubt, contact your installation technician.
Daily utilization
•
This appliance is intended for wine storage only. It is recommended to set the wine cellar to 12 ° C.
•
Do not store inflammable substances or fluids inside the appliance. This would create a risk of
explosion.
•
Do not operate other electrical equipment inside the appliance (mixers, whirling rotor for ice cream,
etc.).
•
When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
•
Do not expose the appliance to direct sunlight.
•
Keep the appliance away from candles, luminaries and open flames, in order to avoid fire risk.
•
The appliance is heavy. Be careful when moving it.
If your appliance is equipped with castors, remember that these are only designed to facilitate minor
movements. Do not move the appliance over long distances.
Do not lean or climb on the appliance or its elements.
In order to avoid falling objects and to prevent damage to the appliance, do not overload the compartments of
the appliance.
Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect the appliance.
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic solvents or
abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
•
This refrigerating appliance is not intended to be used as a built-in appliance
•
To ensure proper electrical connection, follow the recommendations
given in the present manual.
•
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the packaging. It
is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
•
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or with any
hot element (compressor, condenser). Observe the installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the appliance is installed.
▪
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
Summary of Contents for PRO110N
Page 68: ...67...