17
Starting up and temperature regulation
When the power is connected, the cooling system starts to work. The temperature is adjusted in the
range of 4℃—18℃ in the cabinet.
When you press the display control unit’s button, The LED display number gradually diminish, last
to “4℃”or “5℃” ;When you press the display control unit’s button, The LED display number
gradually largen last to “18℃”;You can set on certain position, Which means that if the temperature in the
wine-cooler reach the point set, self-control temperature system stops cooling system so the temperature
in the cabinet rises gradually. when the inside temperature rises above the set point, Cooling self-control
temperature starts to work again.
You can press
the
and button then the display can change from Celsius( ℃) to
Fahrenheit (℉).You can press the button
, then the lamp can change from lighten to go out.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature to
“4℃”or “5℃” can cause the compressor to run continuously.
Reason: when the ambient temperature is high, the compressor must run continuously to maintain
the low temperature in the appliance.
The wine cooler will not be able to defrost since automatic defrosting of the wine cooler is only
possible when the compressor is not running (see also “Defrosting” section). The result is the build up of a
thick layer of frost on the wine cooler rear wall. If this happens, turn the temperature regulator back to a
warmer setting “4℃”or “5℃”. At this setting the compressor will be switched on and off as usual and
automatic defrosting recommenced.
Summary of Contents for LS33
Page 11: ...11...