15
1. Grommet
2. Screw 3. Top hinge 4.Grommet 5. Closing clip
6. Phillips screw 7. Washer 8. Door pivot guide 9. Washer 10. Hinge nut 11. Pivot
12. Grommet 13. Handle of door 14. Chamfer head screw
3.2
Installing the drip tray
Install the drip tray on the compressor support at the back of the cabinet, locating it under the small pipe
protruding from the housing, the lower part of the tank being placed under this pipe. See diagram below:
Installing the drip tray
3.3 Installing the carbon filter
Install the carbon filter, which you will find inside your
cabinets “accessories” box, by placing it in the air circulation
hole located on the top inside the cabinet. The carbon filter can
be used for one year, please change it thereafter. Contact your
local distributor for new carbon filter. Please remove the used
carbon filter before inserting the new one.