La Rocca Expres VE2, User Manual

Page: 21 / 25

MANUAL DE USUARIO | USER’S GUIDE
VE2 | VE3
© LA ROCCA EXPRÉS S.A. | www.larocca.es 21
group, you must program first the doses
of group 1 and then the other groups.
6.3. SETTING THE CLOCK
To set the clock you must start as the
dosage programming, pressing for 5
seconds the “continuous” button until the
“doses settings” screen appears on the
LCD.
Then release the “continuous” button and
press it once again. The following screen
will appear on the LCD:
Then you must use the keyboard (6) with the
features:
First press “Ok” and then it will appear the
current time and day of the week. The
blinking value of the hours can be modified
with the + or
– keys. When the right value is
settled, you can press Ok to accept, and the
minutes will start to blink. Select again the
right value with + and
– and press Ok when
the desired minutes are settled.
Finally, set the day of the week the same
way, pressing Ok to accept it.
To abandon the programming mode and
reach the stand-by screen on the LCD, press
twice the “programming” key.
6.4. CHECKING THE COUNTERS
To see the counter values, you must start as
the dosage programming, pressing for 5
seconds the “continuous” button until the
“doses settings” screen appears on the
LCD.
Then release the “continuous” button and
press it twice. The following screen will
appear on the LCD:
Pre ss the “Ok” key to see the first scree n:
From now on, press the continuous key to
check all the counter pages. Pressing once
we get the litres remaining for the
scheduled revision.
Pressing once again we get the total coffees
served.
And finally, the counters of every coffee
served by every dose of every group of the
machine.
7. COFFEE MACHINE CLEANING
IMPORTANT: To obtain the best efficiency,
quality and performance of the machine,
you should always follow the cleaning and
care instructions provided in this manual.
Turn off the power switch when cleaning the
exterior of the machine.
All external surfaces should be cleaned with
a wet cloth that will not get out fibres,
threads or scratch the machine.