English
43
la Pavoni
ANTIFREEZING: it is displayed when the machine is off (with
main switch in position “I”) and the program preserving the
icing up of boilers is activated (see “6.19 Menu-programma-
ble functions”).
RINSING PROGRAMMED: it is displayed when the machine
automatically washes the coffee dispenser (see “6.19 Menu-
programmable functions”).
ADD COFFEE: it is displayed when during a grinding phase
the machine detects no coffee beans inside the hopper (ref.
7, fig. 1).
LOAD THE CIRCUIT: it appears when the machine, during
the dispensing of any drink, detects that water is missing from
the boilers.
After having checked the direct water supply, press button
(^ for the COFFEE version) until the water flows re-
gularly from the water dispensing tube (ref.11, fig.1) and the
coffee dispenser (ref.24, fig.1). In the COFFEE version water
only flows from the coffee dispensing unit.
PROGRAMMING: it is displayed when machine programming
is accessed (see “6.19 Menu-programmable functions”).
EMPTY GROUNDS: it is displayed when the grounds tray (ref.
17, fig. 1) is almost full (the machine has completed the pro-
grammed number of dispensing instances).
Other further dispensing instances can be carried out.
OUT OF SERVICE - EMPTY GROUNDS: it is displayed when
the grounds tray (ref. 17, fig. 1) is completely full (the machine
has supplied the programmed number of dispensing instan-
ces).
The machine is locked and no further dispensing is possible
until the grounds tray has been emptied.
CLOSE SERVICE DOOR: displayed when the front door (ref.
13, fig. 1) is not properly closed.
INSERT GROUNDS DRAW.: it is shown when the grounds
tray (ref. 17, fig. 1) is not correctly positioned.
INSERT DRIP TRAY: displayed when the drip tray (ref. 15, fig.
1) is not correctly positioned.
INSERT BREWING UNIT: displayed when the brewing unit
(ref. 25, fig. 1) is not correctly positioned.
BREWING UNIT ERROR: displayed when the brewing unit
(ref. 25, fig. 1) incorrectly performs its working cycle; switch
machine off and call the AUTHORISED SERVICE CENTRE.
SENSOR ERROR 01: displayed when a temperature sensor
is out of order. Switch machine off and call the AUTHORISED
SERVICE CENTRE.
TEMPER. ERROR 01: displayed when one of the boiler hea-
ting elements is out of order. Switch machine off and call the
AUTHORISED SERVICE CENTRE.
DESCALING: it is displayed when the machine requires this
type of intervention, having carried out the programmed num-
ber of dispensing instances. Switch machine off and call the
AUTHORISED SERVICE CENTRE.
The descaling interventions depend on the machines’ work
cycles programmable by the maintenance technician.
MAINTENANCE: it is displayed when the machine requires
maintenance having performed the programmed number of
dispensing instances. Switch machine off and call the AUTHO-
RISED SERVICE CENTRE.
Maintenance interventions are based on the machine’s working
cycles, programmable by the maintenance technician.
PLEASE NOTE: The visual display messages are accompa-
nied by on intermittent beeping sound.
6 . 1 9
6 . 1 9
6 . 1 9
6 . 1 9
6 . 1 9
Menu-programmable functions
Menu-programmable functions
Menu-programmable functions
Menu-programmable functions
Menu-programmable functions
The machine can be set by programming the menu; these
modifications match the product dispensed to User require-
ments.
Important
During the programming phase several keys assume a
different function from that applicable during normal use
and permit:
(access to
access to the programming menu
by keeping the key pressed for 5
secs. (the display will show
“PROGRAMMING”);
ENT
(Enter)
passing from a menu level to the
next; preparing a datum to be
modified; confirming a datum or
a function;
ESC
(Escape)
cancelling unconfirmed modifica-
tions; stepping back to the pre-
vious menu level until quitting.
(Down)
passing to the next item within the
same programming level;
increasing the value of a datum
to be modified.
(Up)
switching to the previous item
within the same programming le-
vel; reducing the value of the da-
tum to be modified.
Several functions also foresee the programming of one
or more data (already programmed for standard values).
In order to operate on the data values to be re-program-
med it is necessary to:
-
Select function.
-
Confirm function with key
ENT
(Enter).
-
The blinking cursor is positioned under the value
to be modified.
-
Press keys
(Up) or
(Down) to modi-
fy the value.
-
Confirm the datum modified with key
ENT
(En-
ter).
programming)
