LA NORDICA TERMOROSSELLA PLUS EVO DSA 4.0, User Manual

Page: 31 / 116

ENGLISH
TEChNICAL DATA
definition in accordance with EN 13240
Constructive system
global thermal power in kW
Nominal thermal power in kW
power given back to water in kW
power given back to the room in kW
hourly consumption in kg / h (wood with 20% humidity)
Efficiency in %
CO measured at 13% oxygen in %
Smoke outlet diameter in mm
Chimney height - dimension in mm
fluid contents of the exchanger in l (litres)
Chimney draught
in
Pa
(mm h
2
o)
boiler connections (Ø)
Automatic discharge pipe diameter (Ø)
Exhaust gas emission in g/s – wood
Exhaust gas temperature
in °C - wood
Optimal working temperature in °C
max. working pressure in bar
hearth opening size in mm (W x h)
hearth size in mm (W x h x d)
Oven size in mm (W x h x d)
Type of grill
movable - flat
height in mm
width in mm
Depth in mm
weight in kg
fire prevention safety distances
Chapter fire prevention safety
heatable m
3
(30 kcal/h x m
3
)
(*) 200 mm diameter can be used with flue of no less than 6 m.
(**) The proposed value are indicative. The installation must, in any case, be sized and verified according to the general calculation method in UNI
EN13384-1 or by another method of proven efficiency.
(***) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume of the
product is: favourable type of building (30 kcal/h x m 3 ); less favourable type of building (40 kcal/h x m 3 ); unfavourable type of building (50 kcal/h
x m 3 ).
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary heating, in
the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
ImPORTANT : The poWer of The ConneCTed heaTIng sysTem musT be proporTIonal To The poWer Transferred To The WaTer
by The ThermoproduCT; a Charge WhICh Is Too loW does noT alloW regular oven operaTIon, WhIle a Charge WhICh Is
Too hIgh prevenTs adequaTe radIaTor heaTIng.
The declared technical data have been achieved by burning beech wood class “A1” according to the requirement UNI EN ISO 17225-5 and wood
moisture content less than 20%. By burning a different kind of wood the efficiency of the product itself could change and some specific adjustments
on the appliance could be needed.
TERmOROSSELLA
PLuS EVO DSA
4.0
TERmOROSSELLA
PLuS fORNO DSA
4.0
TERmONICOLETTA
EVO DSA
4.0
TERmONICOLETTA
fORNO DSA
4.0
1 1 1 1
12,6 12,6 12,6 12,6
11,1 11,1 11,1 11,1
8 8 8 8
3,1 3,1 3,1 3,1
3 3 3 3
88 88 88 88
0,073 0,073 0,073 0,073
130 130 130 130
(*) (**) 4m 250x250 Ø250 - 5m 220x220 Ø220
18.5 18.5 18.5 18.5
12 (1,2) 12 (1,2) 12 (1,2) 12 (1,2)
1 ”f gas 1 ”f gas 1 ”f gas 1 ”f gas
½”m gas ½”m gas ½”m gas ½”m gas
7,9 7,9 7,9 7,9
185 185 185 185
70 - 75 70 - 75 70 - 75 70 - 75
vea 1,5 – veC 3 vea 1,5 – veC 3 vea 1,5 – veC 3 vea 1,5 – veC 3
355 x 220 355 x 220 355 x 220 355 x 220
307 x 347 x 345 307 x 347 x 345 307 x 347 x 345 307 x 347 x 345
- 330 x 300 x 370 - 330 x 300 x 370
915 1359 980 1423
559 559 587 587
533 533 572 572
162 - 175 (pT) 218 - 242 pT 183 254
318 (***) 318 (***) 318 (***) 318 (***)
12