La Marzocco vulcano Instruction Manual Download Page 8

in a row for a double portion. 
To centre the coffee drop into the filter
holder, it is possible to carry out a side-
ways   adjustment   of   the   support   fork
located under the dispenser, by slightly
loosening   the   fixing   screws   and   then
tightening   them   again   after   having
moved the fork into the new position.

FORK THICKNESS

If necessary, use shims (included in the
package)   to   back   the   position   of   the
fork. After finding the best position, fix
the fork with the appropriate screws.

Vulcano on Demand

In order to adjust the size of the portion
dispensed, use the push button controls
located  on  the lid  of  the funnel.   After
having   set   the  optimal   degree   of   fine-
ness, check the weight of the dose with
a digital precision scale. 
In   order   to   adjust   the   dose   press   the
push button “MENU” for 3 seconds; the
display will blink. 

Select   the   dose   you   wish   to   adjust   :
either   the   single   dose   (indicating   one
cup) or the double dose (indicating two
cups). The display will show the grinding
time (in seconds) of the selected dose.
By pressing  the push  buttons “+” and
“-“ the grinding time can be increased
or   decreased   and   consequently   the
selected   dose   can   be   increased   or
decreased. 
Approximately,   a   change   of   0.10
seconds   is   equivalent   to   a   change   of
dose of 0.3 grams (0.01 ounces). 
To  set   the  desired   amount   of  grinding
time press the push button “MENU” for
3 seconds. A blinking of the display will
confirm the data have been saved and
the exit from the adjusting program. 
Use   a   digital   precision   scale   to  check
again   the   weight   of   the   dose   and,   if
necessary,   repeat   above   mentioned
operation.

PUSH BUTTON PANEL 

 

 GRINDING TIME

 ADJUSTMENT

MENU BUTTON

BUTTON

PUSH BUTTON FOR

DISPLAY

 MANUAL GRINDING

SINGLE 

DOUBLE

DOSE BUTTON

 DOSE BUTTON

WHEN   YOU   ARE   INSIDE   THE
ADJUSTING   PROGRAM   IT   IS   NOT
POSSIBLE   TO   OPERATE   THE   APPLI-
ANCE. 
IF   THE   APPLIANCE   GETS   SWITCHED
OFF   (SWITCH   IN   THE   POSITION   O)
BEFORE   EXITING   FROM   THE
ADJUSTING PROGRAM THE CHANGES
ARE NOT SAVED.
In order to collect the portions of ground
coffee, insert the filter holder all the way
onto the fork-shaped support under the
ground coffee outlet.

7

EN

Summary of Contents for vulcano















Reviews: