2
A
Parts List
Prior to assembly, read the instructions carefully. Check all parts against this parts list. Carry out assembly on a soft
surface to avoid scratching the paint. Please retain this information for future reference.
Assembly Diagrams
Figure 1
Figure 3
Figure 2
Figure 4
Assembly Instructions
IMPORTANT! - Remove any packaging before use, but retain the safety instructions and store them with this product.
STEP 1 - Ensure parasol is secure and stable by using a suitable parasol base.
STEP 2 - Remove the vertical thumbscrew as shown in figure 1 of the assembly diagram.
STEP 3 - Open unit and attach around the parasol pole. Re-insert vertical thumbscrew and tighten fully as shown in
figure 2 of the assembly diagram (do not overtighten).
STEP 4 - Slide the unit up the parasol pole to the desired height (no less than 1.8m) and tighten the large horizontal
clamping thumbscrew (figure 3).
STEP 5 - Bring the mains lead through the hole and connect into the base of the unit.
STEP 6 - Connect plug on the mains lead into an RCD protected outdoor weatherproof socket.
STEP 7 - To tilt heater heads, attach the adjusting lever (2) to each heater head using 1x wing nut (A).
The product is now ready to use but please ensure you have read these instructions thoroughly prior to use.
1 (1x)
2 (4x)
A (4x)
