5
Assembly instructions
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this
product. Please refer to diagram A on page 4 when following the instructions below.
WARNING - When locating a hook (not included) into the chosen ceiling joist, ensure the ceiling is in good
condition and suitable to hold this type of product. The ceiling hook (not included) MUST be able to hold a
minimum weight of 8Kg.
When moving adjusting the height of the heater, ensure it is unplugged from the power source and is completely
cold before attempting to move the unit.
The heater MUST be a minimum of 2m from the ground.
ASSEMBLY
STEP 1 - Locate chain clip (3) firmly and completely onto the loop (5) provided at the top of the heater (6).
STEP 2 - Locate chain clip (1) firmly and completely onto the ceiling hook (not included).
STEP 3 - To adjust the height of the heater lift the unit and hook the desired chain link (2) over the ceiling hook.
(not included).
STEP 4 - Tie up the power cord (4) by using the plastic band provided. The power cord (4) should NOT touch
the edge of the heater (6).
The heater is now ready to use. Please see operation instructions. Ensure you have read these
instructions thoroughly prior to use.
