Assembly instructions
5
IMPORTANT! - Remove any packaging before use, but retain the safety instructions and store
them with this product. Please refer to diagram A on page 3 when following the instructions
below.
ASSEMBLY
STEP 1 - Screw the bottom tube (5) clockwise into the base (6). Make sure to attach end with
the least (more prominent) thread.
STEP 2 - Feed the power cable (8): female plug first, up through the hole in the base (6) and
through the bottom tube (5) and pull through approximately 1m of cable (8).
STEP 3 - Connect one of the middle tube sections (4) to the bottom tube (5) by screwing them
in a clockwise direction.
STEP 4 - Repeat Step 3 connecting the second middle tube section (4) to the one already in
place. Remember to feed the power cable (8) through as you go.
STEP 5 - Connect the top tube section (2) to the middle tube section (4) by screwing them in a
clockwise direction.
STEP 6 - Lie the product on its side on the floor, connect the plug on the heater head (1) to
the power cable (8), encase the connected plugs inside the plastic housing (3).
Please refer to diagram A, figure 1.
STEP 7 - Feed the plastic housing (3) down into the top tube section (2).
STEP 8 - Push the heater head (1) onto the top tube (2), aligning the holes on the heater head
(1) and the top tube section (2). Once aligned, fix in position using 2x screws (A).
STEP 9 - Fix the power cable (8) to the base (6), using the 2x pre-attached plastic fittings (7)
and 4x nuts (D). Please refer to diagram A, figure 2. Now stand the heater upright
onto its base.
To fix your heater to the ground, drill three holes into the ground, evenly positioned around the
edge of the base section. Use one floor fixing bracket (B) per hole to secure the base section,
ensuring the elongated hole on each bracket correctly aligns with each hole. Secure using one
floor fixing bolt (C) per bracket, ensuring each bolt is fully tightened with a spanner.
The heater is now ready to use. Please see operation instructions. Ensure you have
read these instructions thoroughly prior to use.
