background image

 

31

 

 

                                                                                                                                                           

C

ONSOLE 

I

NSTRUCTIONS – 

U

SER

 S

ETTING

 P

ROGRAM (P13 ~ P16)

”  

 

  “

H.

 

DURING WORKOUT, THE TORQUE/TENSION LEVEL IS EASILY CHANGED AT ANY TIME

 

 

UP 

or

 DOWN

 button: You can change the torque/tension level (from 1 to 16 levels) at any           

time during workout by pressing 

UP 

or

 DOWN

 button 

 

 

 

 

 

 

 
 

 

I.

 

DURING WORKOUT, ALWAYS NOTICE TARGET HEART RATE – A EASY WAY TO SET A GOAL TO 

STRENGTHEN YOUR CARDIOVASCULAR

 

WORKOUT

” 

 

 

To improve your cardiovascular condition, while input your personal age during the 

setting mode, the console will calculate the appropriate 

TARGET HEART RATE

 for you 

automatically 

 The 

TARGET HEART RATE calculation

 is based on 85% of the maximum heart rate. 

For example: For a 30-year-old user, the max. user heart rate should be 161 

=

 (220-30) x 85% 

 

The console will monitor your pulse and compare the value of your pulse with 

TARGET HEART RATE

. The value of 

HEART RATE

 will keep flashing to warn you to slow down or lower the torque/resistance level if your pulse value is 

greater than 

TARGET HEART RATE

 

 

 

J.

 

DURING WORKOUT, HOW TO REVIEW SPEED, DISTANCE, CALORIES, RPM, ODO (ODOMETER) AND WATT

” 

 

During workout (after pressing 

START/

PAUSE

), the user could press 

MODE

 to select 

SPEED

DISTANCE

 and 

CALORIES

, or

 RPM

ODO (Odometer) 

and 

WATT 

 
 
 
 
 
 

 

RPM

ODO

WATT

 will show at the same time

     

SPEED

DISTANCE, CAL.

 will show at the same time

 

 

 

About 

ODO (odometer)

, the function is similar to 

DISTANCE

, will accumulate the total distance traveled by the item 

during workout

If there is any necessary to reset 

ODO

’s distance value, press 

UP

,

 

MODE

,

 

DOWN

 and

 

ENTER

 at the same time to let the motor automatically calibrate to reset 

ODO

 value 

to zero

 

 

 

 

 

 

Summary of Contents for 15 Neon II








































Reviews: