8
reception problems may occur. If the temperature is not being received, then see "
915MHZ
RECEPTION
", before resetting the units.
In the event of changing batteries to the transmitter, the projection clock needs to be reset.
(See
RESETTING THE PROJECTION CLOCK
)
5. Press the SET key to manually enter a time initially.
RESETTING THE PROJECTION CLOCK
To reset the Projection clock to the factory default setting or in case of a malfunction or
changing batteries to transmitter, please remove all batteries from the unit and unplug the
AC/DC adaptor from any power source. With power disconnected, press any button 20
times. Wait at least for 3 minutes before powering up the Projection clock again.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy
of these units (Battery life See
Specifications
below).
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.