La Crosse WT489, Instruction Manual

Page: 8 / 12

P. 8
4. When both , or icon disappear, the alarm is turned off.
5. Press ALM 1.2 again, the LCD display shows
and “
0:00
” and flashes. You could do
alarm 2 settings by repeating Step 2 to Step 4 above.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When the alarm is sounding, press the ALM 1.2 to stop the alarm sound and automatically reset it to
come on the following day.
TO USE THE SNOOZE ALARM
When alarm is sounding, touch the
SNOOZE…LIGHT
on the top of your unit once, the alarm will be
silenced and come on again according to the set snooze duration.
AUTOMATIC SNOOZE ALARM
If the
SNOOZE….LIGHT
is not touched during the alarm is sounding, the alarm will last for 3
minutes and then turns off automatically. The alarm will stop temporarily according to the set snooze
duration (5-60 minutes) and then sound again. This automatic snooze function will last for 1 hour.
To stop the alarm sound, press the ALM 1.2 to stop the alarm sound and automatically reset it to
come on the following day.
TO USE THE WHITE LED LIGHT OR THE COLOR CHANGING MOOD LIGHT
1. Simply tap on the top
SNOOZE…LIGHT
of your unit to turn on the white LED light. The LCD
display shows L10 , which is the default brightness of the white LED light. You could press
▲
or
▼
to increase or reduce the brightness Level from 0 (lowest) to L15 (highest).
2. Touch the top
SNOOZE…LIGHT
again to turn on the color changing mood light. The LCD
shows