Projection Direction key
•
Press to rotate the time/ outdoor temperature projection image in 90
°
increments
•
Press to activate the EL back-light
TIME ZONE SETTING
The time zone default of the Projection clock is “-5h”.
To set a different time zone:
1.
Press and hold the MODE/MIN key for about
3 seconds. The current time zone value at the
bottom of the LCD display will start flashing.
2.
Press and release MODE/MIN key to adjust
the time zone. The range runs from 0h to 12h,
then –12h to 0h, in consecutive 1-hour intervals.
3.
Confirm with the SNOOZE key and enter the
Manual time setting
.
MANUAL TIME
The time can be manually set if the projection alarm clock cannot detect the WWVB-
signal (due to disturbances, transmitting distance, etc.). The clock will then work as a
normal Quartz clock:
1.
The hour and the minute digits
will start flashing.
2.
Use the AL/HOUR key to set
the hour; MODE/MIN key to
set the minute.
3.
Confirm with the SNOOZE key
and enter the
Calendar setting
.
Note:
The unit will still try and receive the signal at 2:00 am despite it being manually
set. When it does receive the signal, it will change the manually set time into the
received time.
CALENDAR
The date default of the Projection clock is 1. 1. in the year 2006. Once the radio-
controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually.
1.
The year starts flashing.
2.
Use the MODE/MIN key to set the year (between years 2001 to 2029).
3.
Press the SNOOZE key to confirm and to enter the month and day setting. The
month and day digits will start flashing.
4.
Use the AL/HOUR key to set the day (or month) and MODE/MIN key to set the
month (or day).
5.
Confirm with the SNOOZE key and enter the
12/24 hour time display setting
.
Note:
If 12hr time format is selected, month and date will be display. If 24hr time format
is selected, date and month will be display.
12/24 HOUR TIME DISPLAY
1.
“12h” or “24h” flashes in the LCD.
2.
Press the MODE/MIN key to select the “12h”
or “24h” display mode.
3.
Confirm with the SNOOZE key and enter the
°C/°F temperature setting
.
°C/°F TEMPERATURE:
The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree
Celsius):
1.
The “°F” will be flashing.
2.
Use the MODE/MIN key to toggle between
“°C” and “°F”.
3.
Confirm with the SNOOZE key and enter the
DST ON/OFF setting
.
DST ON/OFF (DAYLIGHT SAVING TIME):
Note:
The DST default is “On”, meaning that the
WWVB will automatically change the time
according to Daylight Saving Time in the spring
and fall. For areas that do not recognize DST
changes (Arizona) turn the DST “OFF”:
1.
The DST “ON” will be flashing.
2.
Use the MODE/MIN key to toggle between “ON” and “OFF”.
3.
Press the SNOOZE key again to confirm and return to the normal display.
SETTING THE ALARM
1.
Press and hold “AL/HOUR” button for about three seconds until the alarm time is
flashing.
2.
Press and release “AL/HOUR” to advance the hour, and “MODE/MIN” to advance
the minute.
3.
Press the SNOOZE key to confirm. The alarm is now set and activated.
LOW BATTERY ICON:
Low battery on clock
Low battery for outdoor temperature sensor.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The sensor is supplied with a holder that may be attached to a
wall with the two screws supplied. The sensor can also be
position on a flat surface by securing the stand to the bottom to
the transmitter.
To wall mount:
1.
Secure the bracket onto a desired wall using the screws
and plastic anchors.
2.
Clip the sensor onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place
all units in the desired locations to check that the outdoor
temperature and humidity readings are receivable. In event that
the signal is not received, relocate the transmitter(s) or move them slightly as this may
help the signal reception.
The mounting surface, however, can affect the transmission range. If for example the
unit is attached to a piece of metal, it may then either reduce or increase the transmitting
range. For this reason, we recommend not placing the unit on any metal surfaces or in
any position where a large metal or highly polished surface is in the immediate proximity
(garage doors, double-glazing, etc.). Please ensure that the Projection alarm clock
Station can receive the 915 MHz signal from the outdoor transmitter at the positions that
you wish to situate them.
SPECIFICATIONS:
Wireless outdoor temperature range : -39.8°F to 139.8°F (-39.9°C to 59.9°C)
Indoor temperature range
: 14°F to 99.9°F (-9.9°C to 37.7°C)
Projection arm rotation
: Up to 90°
Projection data rotation
: Left to right, right to left, up, down
Transmission range
: Up to 330 Feet (open air)
Transmission frequency
: 915 MHz
Power Requirements:
Projection alarm: 2 "AA" Alkaline batteries (not included) or included AC power adapter
Wireless Sensor: 2 "AA" Alkaline batteries (not included)
Dimensions (L x W x H) :
Clock
:
3.6" x 5.6" x 1.4"
Temperature transmitter :
5.05 " x 1.5" x .83"
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing
defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and
used in North America and only to the original purchaser of this product. To receive warranty service,
the purchaser must contact La Crosse Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized
service center. The original dated bill of sale must be presented upon request as proof of purchase to
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as
stipulated herein, with new or reconditioned parts or products if found to be defective during the limited
warranty period specified above. All replaced parts and products become the property of La Crosse
Technology, Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever
is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered
by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which
is not in need or repair, you will be charged for the repairs or examination.
The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to
a La Crosse Technology, Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including
the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims
must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative
surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5)
damage resulting from the performance of repairs or alterations by someone other than an authorized
La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the products inability to receive a signal
due to any source of interference.
This warranty covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-related
circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP
OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your State.
Some States do no allow the exclusion of consequential or incidental damages therefore the above
exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated
or processed using electronic, mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly
checked and corrections made in the next issue. We accept no liability for technical mistakes or printing
errors, or their consequences.
All trademarks and patents are acknowledged.
FCC ID: OMO-TX29U (transmitter)
FCC DISCLAIMER
RF Exposure mobile:
The internal / external antennas used for this mobile transmitter must provide a separation distance of at
least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter."
Statement according to FCC part 15.19:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Statement according to FCC part 15.21:
Modifications not expressly approved by this company could void the user's authority to operate the
equipment.
Statement according to FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help
Flashing
Flashing
Flashing
Hour
flashing
Minutes
flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Alarm-ON icon
EJMA5220L213
Printed in China
