7.
If after 10 minutes, the DCF time has not been received, use the IN/OUT/SET/CH
key to manually enter a time initially. The clock will automatically attempt to receive
the DCF time at each full hour or after manual set time. When this is successful, the
received time will override the manually set time. The date is also updated with the
received time. (Please refer also to notes on
“Radio controlled Time Reception”
and
“Manual Time Setting”
).
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The Weather station uses 2 x AAA, IEC LR3, 1.5V batteries. To
install and replace the batteries, please follow the steps below:
1.
Insert finger or other solid object in the space at the
bottom center of the battery compartment and lift up
to remove the cover.
2.
Insert batteries observing the correct polarity (see
marking).
3.
Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO
OUTDOOR TRANSMITTER (OPTIONAL)
The Thermo-Hygro Outdoor Transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install
and replace the batteries, please follow the steps below:
1.
Remove the battery cover.
2.
Insert the batteries, observing the correct polarity (see marking).
3.
Replace the battery cover on the unit.
Note:
In the event of changing batteries in any of the units, all units need to
be reset by following the setting up procedures. This is because the
transmitter at start-up assigns a random security code and this code
must be received and stored by the Weather Station in the first 82
seconds of power being supplied to it.
BATTERY CHANGE
It is recommended to replace the batteries in all units on an annual basis to ensure
optimum accuracy of these units.
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
FUNCTION KEYS
:
The weather station has 2 functions keys:
MIN/MAX/+ key
IN/OUT/SET/CH key
