Step 8:
Log in to your account on
www.weatherdirect.com
and follow the online
instructions to complete the registration and configure the TX60U-IT sensor so
that you may begin collecting measurement logs. You may select your desired
transmission period (2, 5, 10, 20 minutes) and input your alarm settings for
temperature and humidity.
Note:
To delete or reset the TX60U-IT sensor from your account, press and
hold the button on the sensor until the LCD displays a full segment and then
delete the record in your Weather Direct® account. WARNING: If you do this,
you will have to re-register your device.
OPTIONAL TEMPERATURE PROBE
If the optional probe for the TX60U-IT sensor is unplugged, the LCD on the
TX60U-IT sensor will display "nC" for the CHANNEL 2 reading. The probe can
be plugged into the TX60U-IT sensor at anytime without resetting the units.
AUTOMATIC SPREADSHEET CREATION OF MEASUREMENT LOG
Once the TX60U-IT sensor is set up on your
www.weatherdirect.com
account
and is building a measurement log, you can download the data to your
computer in the form of a spreadsheet. You have the option to either: "save the
file to your hard drive" or "open it directly from the website". You must have an
application on your computer that supports
Microsoft® Excel
formatted files for
this option to work. No subscription required. Please refer to
www.weatherdirect.com
for more information.
1 YEAR OF NOTIFICATIONS IS INCLUDED WITH INITIAL SENSOR
ACTIVATION ON YOUR WWW.WEATHERDIRECT.COM ACCOUNT:
Once the TX60U-IT sensor is set up on your
www.weatherdirect.com
account,
you may choose to activate the optional cell phone / e-mail notifications:
(1) If temperature or humidity exceed your defined range
(2) If connection is lost
(3) If batteries are low
BATTERY INSTALLATION
1.
Remove the battery cover by sliding the cover down.
2.
Observing the correct polarity install 2 AAA, Alkaline batteries. The
batteries will fit tightly (to avoid start-up problems make sure they do not
spring free).
3.
Replace the battery cover by sliding upwards. Be sure battery cover is on
securely.
LOW BATTERY INDICATOR
When batteries are low, the low battery indicator shows up on the LCD. You will
receive an e-mail or cellular notification (if notifications have been configured)
when the battery power of the TX60U-IT sensor is low. Change the batteries
immediately.
Note:
The LED turns ON briefly after changing batteries. However, the LED
turns OFF if there is no Weather Direct® Gateway connected. The previously
stored information in the TX60U-IT sensor will not be affected or cancelled
while you change the batteries.
MOUNTING
THE TX60U-IT TEMPERATURE & HUMIDITY SENSOR
The TX60U-IT sensor can be mounted onto a wall with the use of screws
MOUNTING WITH SCREWS
1.
Remove the mounting bracket from the
TX60U-IT sensor.
2.
Place the mounting bracket over the desired
location.
3.
Mark the mounting surface with a pencil
through the two screw holes of the bracket,.
4.
Screw the mounting bracket onto the
mounting surface. Ensure that the screws
are tight against the bracket.
5.
Insert the TX60U-IT sensor into the bracket.
TABLE STANDING AND OTHER MOUNTING OPTIONS
With the mounting bracket installed at the bottom
or on the top of the TX60U-IT sensor, the user can
place it on any flat surface.
Note:
Before permanently fixing the TX60U-IT sensor wall base,
place all units in the desired locations to check that the outdoor
temperature & humidity readings are receivable. In event that the
signal is not received, relocate the TX60U-IT sensor or move them
slightly as this may help the signal reception.
MAINTENANCE AND CARE
Extreme temperatures, vibration, and shock should be avoided to prevent
damage to the units.
Clean displays and units with a soft, damp cloth. Do not use solvents or
scouring agents; they may mark the displays and casings.
Do not submerge the sensor case in water.
Avoid kinking the temperature probe cable.
Immediately remove all low powered batteries to avoid leakage and damage.
Opening the casings invalidates the warranty. Do not try to repair the unit.
Contact La Crosse Technology® for repairs.
SPECIFICATIONS
Data measuring range:
The device sensor:
Temperature range:
-40 °F to 140°F with 0.2°F resolution
“OFL” displayed if outside this range.
Humidity measuring range:
3% to 99%
Transmission range:
200 feet (60.96 m) in open space
The probe sensor:
Temperature range:
-40 °F to 140°F with 0.2°F resolution
“OFL” displayed if outside this range, and
displayed “nC” if no connection.
Power Supply:
Temperature transmitter:
2 x AAA, IEC LR03, 1.5V
Battery life cycle:
Approximately 24 months
Recommended battery type:
Alkaline
Dimensions (H x W x D):
5.23" x 0.76" x 1.44"
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem
determination and service procedures. Warranty service can only be performed by a La
Crosse Technology, Ltd authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge
as stipulated herein, with new or reconditioned parts or products if found to be defective
during the limited warranty period specified above. All replaced parts and products become
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology,
Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90)
days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and
materials for all repairs covered by this warranty. If necessary repairs are not covered by this
warranty, or if a product is examined which is not in need or repair, you will be charged for
the repairs or examination. The owner must pay any shipping charges incurred in getting
your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service
center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of
the product to a USA address only.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable use or
neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring
during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of,
any accessory or decorative surface; (4) damage resulting from failure to follow instructions
contained in your owner’s manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse Technology, Ltd authorized
service center; (6) units used for other than home use (7) applications and uses that this
product was not intended or (8) the products inability to receive a signal due to any source of
interference.. This warranty covers only actual defects within the product itself, and does not
cover the cost of installation or removal from a fixed installation, normal set-up or
adjustments, claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE
USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS
NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your
State. Some States do no allow the exclusion of consequential or incidental damages
therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information, please contact:
La Crosse Technology, Ltd
2809 Losey Blvd. S.
La Crosse, WI 54601
For online contact / support / e-mail:
www.weatherdirect.com/help/
For online setup and registration:
www.weatherdirect.com
For online product information:
www.weatherdirect.com/tx60
FCC DISCLAIMER
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference.
(2)
This device must accept any interference received, including interference that
may cause undesired operation.
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
