Model T83621 www.lacrossetechnology.com/support
Page | 2
GET STARTED
Step 1:
Insert the included 5-volt AC power adapter into projection
alarm and then into wall outlet.
Step 2:
Insert 3 new “AAA” batteries (not included) into the projection
alarm. Observe the correct polarity.
Step 3:
Insert 2 new “AA” batteries (not included) into the TX141-B
transmitter. Observe the correct polarity.
NOTE:
If the outdoor temperature is not displayed after 3 minutes, unplug the AC
adapter and remove batteries from the projection alarm & transmitter for 15 minutes.
Return to
Step 1
above.
SET TIME AND DATE
1. Hold
SET/°F/°C
to enter time set mode.
2. Use
+/TEMP
or
-/TIME
buttons to adjust values.
Press and hold for fast adjustment.
3. Press
SET/°F/°C
to confirm adjustments and move to the
next item.
Time and Date setting order:
1.
WWVB
(ON/OFF)
2.
Time Zone
3.
DST
Daylight Saving Time (ON/OFF)
4.
12/24
Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
Press the
SET/°F/°C
to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
3
5
6
3
3
Battery Cover
Battery
Compartment
3 “AAA”
Observe the correct
polarity before inserting
the batteries
BOTTOM VIEW
