7 |
P a g e
Optional Extra Sensors:
Up to 4 additional Thermo-Hygro, Wind Speed, Rain, Water Leak or any
combination of these sensors can read to the EXTRA SENSOR area of your display. Simply
press and release the EXTRA SENSOR button to view these sensors or turn on Auto Scroll.
Purchase Extra Sensors: For additional sensors to read to your station visit:
https://www.lacrossetechnology.com/sensor-finder/
Not all sensors will read to the station. Be sure to check the chart to see if a sensor can read to
the app only, or both station and app.
HOW DO I ADD EXTRA SENSORS TO MY STATION?
1.
Hold the EXTRA SENSOR button 3 seconds, to add a sensor to the station.
2.
Install batteries in the sensor, and if the sensor has a TX button, press the TX button to force a
signal.
3.
Allow up to 3 minutes to view sensor and ID on station.
Note:
Once sensor is found the search will stop. Sensor, ID, and type will show for 3 seconds
then return to normal display.
4.
Scan sensor bar code ID so it will read in the La Crosse View app.
5.
Added sensors will be available for display in Extra Sensor area of station.
HOW DO I DELETE EXTRA SENSORS FROM MY STATION?
1. Press and release the EXTRA SENSOR button until you see the sensor and ID you wish to
delete.
2. Hold the MINUS (-) button for 3 seconds to delete this sensor. The sensor readings and ID
will show dashes.
3. Sensor will no longer show in the Extra Sensor area.
HOW DO I ADD EXTRA SENSORS TO MY APP?
Open your La Crosse View app to add sensors. Watch the video for adding devices to
the La Crosse View app:
http://bit.ly/LaCrosseView_Support_Vid_10
1. From Main Menu - select “Devices” under “Add/Edit”
2. On Edit Devices page - select “ADD DEVICE”
