Model: C87207 / C87061 www.lacrossetechnology.com/support
P | 2
GET STARTED
Step 1:
Insert 5 volt AC adapter into the wall then into the back of the
alarm clock.
Step 2:
Insert 2
new
AAA Alkaline batteries (not included) into the alarm
clock. Observe the correct polarity.
Restart:
If there is no indoor temperature data after 60 seconds, unplug
the AC adapter and remove batteries from the alarm clock, press any
button 20 times. After 15 minutes, return to
Step 1
above.
LCD Features
USB CHARGING PORT
Charge a smart phone, camera or other devices when the alarm clock is
operating with the AC adapter.
Note:
This is a power-output charging port. It does not provide power to
the alarm clock.
Connect your external device’s USB charging cable (not included) to
the USB charging port on the front of the clock.
Charging times will vary.
USB Power Output:
1A maximum current. Charge 1A devices or
devices that are self-regulating.
Alarm 1 &
Alarm 2
Weekday
Indoor
Temp,
Moon
Phase
Month,
Date
Indoor
Humidity
Manual
Set
Time
Low
Battery
