La Crosse Technology, Ltd
Page 2
•
Settings Backup: Your alarm clock has a capacitor that will keep settings for 6 minutes
in the event it loses power. Time will not display when unplugged.
Alarm Clock Factory Restart
Explanation: The factory restart returns the alarm clock to an “out-of-the-box” state and
often resolves an issue.
Factory Restart: Simply unplug clock for 15 minutes.
If you’re still experiencing issues, use a pen or paper clip to press the factory RESET
button on the back of the clock.
Language
•
This clock will show the weekday and directions in English (default), Spanish, French or
German.
•
Use the
12-Hour Time Format
•
This clock only has 12-hour time format.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
•
Tap the DISPLAY button to adjust the backlight 5 levels of intensity.
•
Intensity Levels: 0FF | 1.5% | 20% | 50% | 100%.
LCD Backlight is not on:
Try this exercise in a dim room. The
will operate at five levels of intensity
(including OFF) at your discretion when using the power cable. Touch the DISPLAY button
a few times. Wait 15 seconds to see if backlight stays on. This will assure it is not in OFF
mode.
What is Auto Dim backlight?
You can set your backlight to automatically dim to level 1 at a set hour for sleeping, then
automatically return to full brightness when you wake.
Set Auto Dimming (Hour only).
1.
Hold the DISPLAY button 2 seconds to enter dimmer set mode. AUTO DIM OFF will
show.
2.
Tap the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3.
Tap the DISPLAY button to select start time (Hour) for dimmer. START TIME and the
hour will flash.
