02
Initial Setup
Power Up
Note:
It may take up to 10 minutes for your sensor data to appear on your
station’s screen.
BASICS
1.
Remove the Insulation Tab from the
Battery Compartment of your Breeze
Pro Sensor, and make sure the power
switch is turned
ON
.
2.
Insert the 5V Power Adapter into
an outlet, and then plug it into the
Power Jack on the back of the
station. Next, remove the Insulation
Tab from the station’s Battery
Compartment.
Bottom of Breeze Pro Sensor
Model No.
LTV-WSDTH01
Back of Station
Model No.
C79790
