SET ALARM:
ALARM HOUR
: Press and hold AL button to enter alarm time set
mode. The Alarm Hour will flash. Use the PLUS button to set the
Hour. Please note AM or PM. Press and release the AL button.
ALARM MINUTE
: The Alarm Minutes will flash. Use the PLUS
button to set the Minutes. Press and release the AL button.
ALARM ACTIVATION:
Press and release the AL button to show Alarm Time.
Press and release the PLUS or MINUS button to activate or
deactivate the Alarm.
The
alarm
icon
appears when alarm is activated.
To stop alarm for one day, press AL button, when the alarm sounds.
The alarm icon
will show solid.
SNOOZE:
When the alarm sounds, press the Zz/CH button to trigger snooze
alarm for 5 minutes. The snooze icon
Zz
will flash.
To stop alarm for one day, press AL button, while in snooze mode.
The alarm icon
will show and the snooze icon
Zz
will disappear.
FAHRENHEIT/CELSIUS:
Transmitter:
Remove the battery cover then press and release the
C/F
button on the transmitter to select Fahrenheit or Celsius.
Clock
: Press and release the
-
/CF
button once to switch from Fahrenheit to
Celsius.
Channels
: If more than one transmitter is used, set each transmitter to a
different channel. To view: press the CH button to select Ch1, Ch2, Ch3 and
auto-channel scrolling display modes.
Auto-channel
will show a circling arrow
above the channel number and
will rotate through each channel approximately every 5-8 seconds
18-HOUR BAROMETRIC PRESSURE HISTORY GRAPH:
The bar chart indicates the air pressure history trend over the last 18 hours
in 5 steps, 0h, -3h, -6h, -9h, & -18h. The columns represent the “hPa” at
specific times. The “0” in the middle of this scale is equal to the current
pressure and each change (0, -3, -6, -9, -18) represents how high or low in
“hPa“ the past pressure was compared to the current pressure.
If the bars are rising, it means that the weather is getting better due to the
increase of air pressure. If the bars go down, it means the air pressure has
dropped and the weather is expected to get worse from the present time
“0h“.
LOW BATTERY:
It is recommended to replace the batteries in all units every 12 months to
ensure optimum accuracy of these units. A low battery icon will display next
to the outdoor temperature when the transmitter batteries are low and next
to the indoor temperature then the batteries in the clock are low.
POSITIONING THE CLOCK:
There are two possible ways to mount the atomic clock:
Foldout leg stands or wall mount.
FOLDOUT LEG STANDS
The two foldout leg stands are located on the back of the
clock. Pull the leg stands out from the back of the clock to
place the clock on a desk or table.
WALL MOUNT
Install one screw (not included) into a wall, leaving
approximately 3/16 of an inch (5mm) extended from the wall.
Place the atomic clock onto the screw, using the hanging hole
on the backside.
Gently pull the clock down to lock the screw into place.
POSITIONING THE OUTDOOR TEMPERATURE SENSOR
The remote temperature sensor should be mounted vertically.
WALL MOUNT
Install one screw (not included) into a wall within leaving
approximately 3/16 of an inch (5mm) extended from the wall.
Place the transmitter onto the screw, using the hanging hole
on the backside.
Gently pull the transmitter down to lock the screw into place.
Mount where direct sunlight cannot reach the outdoor temperature sensor.
Mount the outdoor temperature sensor on a North-facing wall or in any well-
shaded area. The maximum transmitting range in open air is 100-feet (30
meters). Obstacles such as walls, concrete, and large metal objects can
reduce the range.
SPECIFICATIONS:
Indoor Temperature
:
Range:
32° F to 122° F (0° C to + 50° C)
Resolution:
0.1° F
Outdoor Temperature
:
Range:
-4° F to 140° F (-20° C to + 60° C)
Resolution:
0.1° F
Distance:
100 ft (30 meters) RF 434MHz (open air)
Power:
Receiver:
3-AA, IEC, LR6 alkaline batteries (not included).
Transmitter:
2-AAA, IEC, LR3 alkaline batteries (not included).
Dimensions:
Receiver:
11.45” W x 1.24” D x 11.45” H
Transmitter: 4.49” W x .86” D x 3.54” H
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product.
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for
problem determination and service procedures. Warranty service can only be performed
by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale
must be presented upon request as proof of purchase to La Crosse Technology, Ltd or
La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to be
defective during the limited warranty period specified above. All replaced parts and
products become the property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd
will pay all expenses for labor and materials for all repairs covered by this warranty. If
necessary repairs are not covered by this warranty, or if a product is examined which is
not in need or repair, you will be charged for the repairs or examination. The owner must
pay any shipping charges incurred in getting the La Crosse Technology, Ltd product to a
La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will
pay ground return shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable
use or neglect (including the lack of reasonable and necessary maintenance); (2)
damage occurring during shipment (claims must be presented to the carrier); (3) damage
to, or deterioration of, any accessory or decorative surface; (4) damage resulting from
failure to follow instructions contained in the owner’s manual; (5) damage resulting from
the performance of repairs or alterations by someone other than an authorized La
Crosse Technology, Ltd authorized service center; (6) units used for other than home
use (7) applications and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference.. This warranty covers only
actual defects within the product itself, and does not cover the cost of installation or
removal from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-
related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to
the State. Some States do not allow the exclusion of consequential or incidental
damages therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is available at:
www.lacrossetechnology.com/512-811
Le manuel d'instruction complet est disponible sur:
www.lacrossetechnology.com/512-811
El manual de instrucciones completo está disponible en:
www.lacrossetechnology.com/512-811
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register.php
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept no
liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.