404-1235UA-SS www.lacrossetechnology.com/support
Page | 4
Q-Mode
Q-Run
Q-Set
DST
ON
OFF
3. Hold the SET button to set the time quickly
4. Press and release the SET button to change the time slowly.
5. When time is set, slide the DST switch to ON (Q-RUN)
position.
6. The second hand will start running from 12:00 and the clock
will keep time as manually set.
Troubleshooting
The wonderful advantage of owning an UltrAtomic clock is that it is
virtually trouble free. When the clock receives a clear atomic time
signal, it will set itself perfectly. If it does not receive an atomic
time signal, consider the following:
•
Batteries –
The clock must have a fresh batteries to receive
and process the time signal. Low batteries are indicated when
the Hour and Minutes hands run as usual but the second hand
stops at the 6.
•
Location –
Try a different location, ideally near a window. Your
clock should be at least six feet from computers, TVs, air
conditioners, other atomic clocks and other electrical
appliances that cause interference.
•
Weather –
Electrical storms between you and Colorado during
the night will interfere with the WWVB signal.
Set
