4
Note:
•
The minutes and seconds of the digital clock cannot be manually set. It will
receive the WWVB time from the analog clock.
•
The time format is fixed to "12-hr" time display. "PM" will be shown in hours
from noon to midnight.
•
The calendar will also be updated once the WWVB signal from the analog
clock has been received.
WORLD TIME SETTING
:
This feature allows you to display a 2
nd
time from anywhere in the world.
The world time can be manually adjusted by 1 hour increments (24 hour time
zone).
1.
Press the Time Set key to enter world time setting.
2.
Press the Time Set key again to set the desired world time. Each key press
will increase the world time by 1 hour.
Note:
•
Once the WWVB signal has been received by the digital clock, the manually
adjusted world time will be updated.
•
If a world time has been manually set prior to reception of the WWVB time,
the time in the digital clock will change correspondingly with the analog clock.
•
The calendar (month/day) will not follow the set world time; it can only be
updated from the WWVB signal.
•
When DST changes, the digital and analog times will set ahead or back
one
hour
in accordance with the NIST signal. To maintain proper World Time,
you may have to manually adjust the hour.
CHANGING THE DISPLAY MODE (Indoor Temperature, Date, Weekday,
World Time, Seconds)
There are 4 possible display modes to view the indoor, month & day, weekday,
world time, seconds.
The
month & day / indoor temperature
is the default display.
To change the display:
1.
Press the Display key once. The display will show the
month & day /
weekday.
2.
Press the Display key a second time. The display will show the
world time /
indoor temperature.
Note:
The indoor temperature can only be displayed in Fahrenheit. The
temperature range is from 14.2ºF to 103.8ºF with 0.2ºF resolution. The
temperature is updated every 20 seconds.
3.
Press the Display key a third time. The display will show the
world time /
seconds
.
4.
Press the Display key a fourth time. The display will return to the default
display.
Note:
If the Display key is pressed during the initial set-up of the of analog clock. The
date and world time sections will not be shown in the different display modes.
Month & day / Weekday
World time / Indoor temperature
Month & day / Indoor temperature
World Time / Seconds
