La Crosse Technology, Ltd.
Page 9
PROGRAM MENU:
The SET button will move through the program menu. The
+ or -
buttons will change
a value. Hold the SET button for 5 seconds to enter the program menu.
WWVB:
WWVB
and
ON
will flash. Press and release the + or - button to select OFF if you wish to
disable the WWVB reception. Press and release the SET button to confirm and move to the next
menu item.
TIME ZONE: The
Time Zone
will flash three letters. Press and release the + or
– button to select
from seven Time Zones: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific,
AKST= Alaska, HAST=Hawaiian time zone. Press and release the SET button to confirm and move
to the next menu item.
DAYLIGHT SAVING TIME:
DST
and
ON
will flash. Press and release the + or - button to select OFF
if you do not observe DST change. Press and release the SET button to confirm and move to the next
menu item.
12/24-HOUR TIME:
12Hr
will flash. Press and release the + or - button to select 12-hour time. Press
and release the SET button to confirm and move to the next menu item.
FAHRENHEIT OR CELSIUS:
°F
or
°C
will flash. Use the + or - button to select your preference.
Press and release the SET button to confirm and move to the next menu item.
HOUR: The
Hour
will flash. Use the + or - button to set the Hour. Be sure to set the Hour correctly for
AM or PM. Press and release the SET button once.
MINUTES: The
Minutes
will flash. Use the + or - button to set the Minutes. Press and release the
SET Button once to confirm and move to the next menu item.
SECONDS: The
Seconds
will flash. Use the + or - button to clear the seconds to 00. Press and
release the SET Button to confirm and move to the next menu item.
YEAR: The
Year
will flash. Use the + or - button to set the Year. Press and release the SET button to
confirm and move to the next menu item.
MONTH: The
Month
will flash. Use the + or - button to set the Month. Press and release the SET
button to confirm and move to the next menu item.
DATE: The
numeric day
will flash. Use the + or - button to set the Date correctly.
Note:
If no buttons are pressed for 20 seconds, set mode will time out and return to live display mode,
reflecting whatever adjustments were made before it timed out
Note:
Press the
+ or -
button once to adjust by 1 unit or hold for fast scroll adjustment
Sunrise/Sunset Times
CITY SELECTION-SUNRISE/SUNSET TIMES:
Note:
Preset City abbreviations are at the end of the instruction manual and quick setup guide.
Choose the city closest to you in a north/south direction. This will provide the most accurate
sunrise/sunset times as the sun moved from East to West.
To select a city location:
Select your country, state, and then city location.
Hold the CITY button for 5 seconds.
USA
will flash next to the sunrise/sunset time.
Press and release the
+ or -
button to select USA, CAN, or MEX as your
country
.
Press the CITY button to confirm the country and select a
state
.
Note:
When selecting Canada or Mexico you will move directly to city selection.
The
state
will flash. Press and release the
+ or -
button to select a
state
.
Press the CITY button to confirm the state and select a
city
.
The
city
location will flash.
Press and release the
+ or -
button to select a
city
from the list at the end of this manual.
Press the CITY button to confirm and
exit.
After a short calculation time, the forecast station shows the times for sunrise and sunset, moon phase
and lunar tide.
TIP:
When DST is in effect, the forecast station will need to receive the WWVB time signal to make the
adjustment for DST. The WWVB signal includes an embedded bit to tell the Station to adjust for DST.
