La Crosse 308-1414B, Instruction Manual, Page: 4 / 14

Model: 308-1414B/308-1414W www.lacrossetechnology.com/support Page | 4
 Station and sensor low battery icon
 Atomic reception indicator
 Snooze / alarm icon
Detailed Setup: Weather Station and Outdoor Sensor
STEP 1:
 Insert the 5-volt AC power adapter into the designated area
on the back of the Weather station.
 Plug the AC power adapter into a wall outlet for continuous
backlight (ON/OFF), and dimmer feature.
STEP 2: (optional battery operation)

Slide tab to down and pull out to remove the battery
cover.

Insert three new AAA Alkaline batteries into the back of the weather
station. Observe the correct polarity (see marking inside the battery
compartment).

The weather station will light up and show indoor temperature, humidity and time.

(Backlight will illuminate for 8 seconds when using only battery power with a
press/release of the SNOOZE/LIGHT button)
STEP 3:
 Ensure that the transmitter is within 10 feet of the Weather station.
 Remove battery cover from transmitter. Slide the battery cover down
and lift off the front.
 Insert two new AA batteries into the TX141TH-BV2 transmitter.
Observe the correct polarity.
 Within three minutes, the Weather station will show readings in the
outdoor temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
Button Functions
▼
(Down) Button
Setting-
 Press to decrease values during setting.
 Hold 2 seconds to quickly adjust values.
Default Time Display-
 Press to display minimum temperature/humidity.
 Hold 2 seconds to clear minimum temperature/humidity memory.
The weather station has 5 buttons across the top and 2
on the front.